High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging problem for owners. From the desired temperature to their favorite light level, guests are more likely to return for an additional stay when they can customize their room to match their preferences. However, providing these functions using old technology wastes lots of energy. As an example, there are plenty of problems with the old card key switches. Guests can put any card within the old switches, or they may ask for more than one card. Even though hotel desk refuses to offer more than one card to a guest, she/he might claim to have lost the credit card.
The standard old technology of hotel card switch. Additionally there is a large amount of over consumption of lights and AC energy because of things running even when guests aren’t in their rooms, and this may cause a monetary loss for the owner. Needless to say, no hotel owner would like to prohibit guests from having a comfortable stay, nor do owners expect guests to get in a dark or cold accommodation. Nobody is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think if they separate the AC through the main network, less energy is going to be consumed, and some believe that motion sensors are definitely the solution. However, these approaches forget to resolve the issue. The AC is easily the most energy-consuming device of, and motion sensors could be nightmares given that they only function based on movement detection, meaning that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company offers the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has many options, including a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the new way for hotel economical technology. By installing this door sensor in the entrance to a room, connecting it to the Energy Servant’s digital input, and programming the logic lines, the problem of room occupancy is totally resolved.
The subsequent logics could be defined for this particular sensor to manage room energy without any discomfort for guests:
Logic 1: If you have any movement inside the room, the occupancy mode will be on.
Logic 2: If the main door is opened and closed, a flag will switch on for just one minute to ascertain if there is certainly movement in room. If no movement is detected after 1 minute, the system will activate energy-saving mode. This can be valuable in situations when a guest enters the room briefly. In energy-saving mode all lights are off except for a nightlight, which stays on for three hours in case there exists another guest having a nap. Also, the AC is definitely not switched off, however its temperature will be decreased by 2 degrees. It will help save energy over time.
Logic 3: When the energy-saving mode is enabled with no movement is detected for more than 3-5 hours, the nightlight and AC will likely be turned off automatically. It is also easy to define lower temperature levels for the AC. Additionally, the power Servant can make the AC on/off when it recognizes that a balcony window/door is open. All of this requires is adding a magnetic contact connected to the balcony window/door and programming the preferred smart decision. The light harvest sensor helps save energy by wscgid balcony lights off when there is enough natural light.
Another practical and beneficial capability of this sensor is its built-in thermostat, that helps maintain the right temperature all the time. This is very important for keeping furniture fresh and intact. Also, in hot spots and even if the room is empty for some time, humidity and bad smells will not be a problem in the room. This sensor may be programmed to alter AC to dry mode when the room temperature reaches or exceeds 28-30C degree. This could happen many times throughout the day if required. A comparable performance may be programmed in cold spots to stop mold.
An alternative choice of the smart system is TV control. In the event the hotel provides the guest using a room tablet, she/he will be able to control the room’s TV with it. This sensor was installed in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The result was considerably enhanced energy management and many satisfactory comments from guests who enjoyed their luxurious stay at this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and requires with just a couple items as well as in the most power efficient way possible. To learn more or even to plan a consultation, give us a call at www.tiscontrol.com